How to Print Barcode Labels for Products: EAN, UPC and Code 128
Use EAN-13 or UPC-A for products sold in shops, Code 128 for stock and asset numbers and QR for links; check the check digit, keep bars wide enough and the quiet zones clear, and print an alignment test at 100% before the real sheet.
Fastest way
Ask your AI to do it
Paste this into the AI agent you already use:
Help me use a Skill with another agent. Ask which agents and package I use, check supported locations and tools, identify any assumptions to change, and verify the workflow with a small example.
Quick answer
Choose the symbology for the job, make sure the number is valid, lay the labels out to match your sheet exactly, and print at 100% scale. Scan one label of each kind before you stick them all.
Which barcode
- EAN-13 (worldwide) and UPC-A (North America) for products scanned at a till. Numbers sold through other retailers must come from GS1.
- EAN-13 numbers starting 20–29 are reserved for use inside your own shop.
- Code 128 for SKUs, asset tags and anything with letters.
- QR codes for links, such as a care guide or reorder page.
Make it scan
- The last digit of an EAN or UPC is a check digit; a typo makes the whole code invalid.
- Keep the narrowest bar at least 0.264 mm for EAN and UPC (80% of the standard size).
- Leave blank quiet zones on both sides; text or a border inside them stops scanners.
- Shortened bars often work on your own shelves but retailers may refuse them.
Print it straight
Print an alignment page on plain paper at 100% (turn off "fit to page"), hold it against a label sheet in front of a light, and adjust the printer margins if it is off. Only then print on the labels.
Do it with an AI agent
LabelKit validates check digits, encodes EAN-13, UPC-A, Code 128 and QR codes, lays labels out at exact millimetre positions for Avery sheets and label printers, and gives an alignment test page and scanning checks.